Open it to run the installer (if asked for permission, click Yes).Download the 64-bit MSI (Windows Installer).
If you already have Putty installed, skip to the next section. But if you don't, browse to:ĭownload Bonjour Print Services for Windows v2.0.2 If you have iTunes installed on Windows you probably don't have to do this. But to do that in Windows you have to install the Bonjour service first. You can find Raspberry Pi's on your network using their hostname followed by. NOTE: Your machine must be on the same WiFi network that you configured the Pi for. This part assumes that ssh is enabled for your image and that the default user is pi with a password of raspberry. Give the Pi plenty of time to boot up (it can take as much as 90 seconds - or more).Raspberry Pi 4: Plug a USB-C power supply cable into the power port.Remove the mini-SD card from the adapter and plug it into the Raspberry Pi.Boot the Raspberry Pi from the micro SD card This is a "logical" eject - meaning it closes files and preps the SD card for removal - you still have to pull the card out yourself.Right-click on boot (on your desktop or File Explorer) and select the Eject option.Be sure to set Save as type to All Files (so the file is NOT saved with a.Paste in the contents above (adjusting for the name of your country code, network name and network password).To enable it you need to place an empty file named ssh (no extension) in the root of the boot disk. Enable ssh to allow remote loginįor security reasons, ssh is no longer enabled by default. On Windows it should appear in File Explorer with the name boot followed by a drive letter. On a Mac it should appear on the desktop with the name boot. A simple fix is to pull the SD card out then plug it back in. Select drive - it may find the SDHC Card automaticallyĪfter you flash (burn) the image, Finder (Mac) or File Explorer (Windows) may have trouble seeing it.Select image - browse to the zip file you downloaded.You can use a new SD card right out of the package. Put a blank mini SD card and adapter into your machine. To run Etcher is pretty straight forward. Download the version for your operating system.To burn an image to the SD card you can use Etcher. Burn the Raspberry Pi image to the SD card I'm using the with desktop and recommended software image: These instructions are for a Raspberry Pi OS Buster (formerly Raspbian Buster) image that I downloaded from here: Download Raspberry Pi OS Buster with desktop You won't need an extra mouse, monitor or keyboard. This article covers how to setup a Raspberry Pi 4 Model B with a desktop for headless remote access over SSH, WiFi and VNC from scratch.
0 kommentar(er)
